Advertisement
Maintenance
WARNING: Disconnect power before attempting any maintenance
or cleaning to reduce the risk of fire, electric shock or damage to
persons.
Light Bulb Replacement
Allow at least five (5) minutes for light bulbs and heater to cool off
before touching bulbs to avoid accidental burning of skin.
Light bulbs need to be replaced when you notice a dark section of
the flame or when the clarity and detail of the log exterior
There are two (2) bulbs under the log set which generate the flames
and embers.
Tool requirements: Phillips screwdriver.
Helpful Hints
It is a good idea to replace all light bulbs at one time if they are close to
the end of their rated life. Group replacement will reduce the number of
times you need to open the unit to replace light bulbs.
Light Bulb Requirements
Quantity of two (2) clear chandelier or candelabra bulbs with an E-12
(small) socket base, 60 Watt rating.
Replacement:
1. Unplug the unit from the outlet.
2. Remove the rear door from the left side of the unit by unfastening
one (1) Phillips screw (Figure 9). Set the door and screw aside.
3. Reach inside opening to remove the bulb(s). Remove the nearest
bulb before attempting to remove the further bulb. Bulbs are
unscrewed in counter-clockwise direction.
4. Insert new bulb(s).
5. Replace rear door and fasten in place.
6. Plug in the Corner Standing Stove.
12
disappears.
Advertisement
