TP-Link TD-W8960N User Manual page 79

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
 Current Network Key: To indicate which WEP key to use, select a transmission key number.
 Network Key 1-4: If you want to manually enter the WEP keys, then enter them in the network
Key 1-4 fields.
Configure WEP Settings
1. Select Shared (good) from the Network Authentication drop-down list. The menu will
change to offer the appropriate settings.
2. Select 64-bit from the WEP Encryption drop-down list.
3. Select "1" from Current Network Key drop-down list.
4. Type in the password in the Network Key 1 field.
5. Click Save/Apply to save the new configuration.
Figure 4-80

Note:
We use Network Authentication Shared (good), Encryption Strength 64-bit, Current Network
Key "1" and enter 10 hexadecimal digits"1234567890" in the Network Key 1 for example, as
shown in Figure 4-80 above.
70