NEC M403W User Manual page 60

SECURITY TYPE
INDEX
KEY
Turn on or off the encryption mode for secure transmission. When turn on the encryp-
tion mode, set WEP key or encrypted key.
DISABLE Will not turn on the encryption feature. Your communications
may be monitored by someone.
WEP 64 bit Uses 64-bit datalength for secure transmission.
WEP 128 bit Uses 128-bit datalength for secure transmission.This option will
increase privacy and security when compared to use of 64-bit
datalength encryption.
WPA PSK-TKIP/ These options provide stronger security than WEP.
WPA PSK-AES/
WPA2 PSK-TKIP/
WPA2 PSK-AES
NOTE:
• The WEP settings must be the same as communication devices such as PC or access point in
your wireless network.
• When you use WEP, your image transmission speed will slow down.
Select encryption key when selecting [WEP 64 bit] or [WEP 128 bit] in [SECURITY
TYPE]. When [WEP 64bit] or [WEP 128bit] is selected for [SECURITY TYPE], the WEP
key is fixed to "1" and cannot be changed.
When selecting [WEP 64 bit] or [WEP 128 bit] in [SECURITY TYPE]:
Enter WEP key.
Select Characters (ASCII)
WEP 64 bit Up to 5 characters
WEP 128 bit Up to 13 characters
When selecting [WPA PSK-TKIP], [WPA PSK-AES], [WPA2 PSK-TKIP] or [WPA2
PSK-AES]:
Enter encryption key. Key length must be 8 or greater and 63 or less.
49
3. Convenient Features
Hexadecimal digit (HEX)
Up to 10 characters
Up to 26 characters