NEC M403W User Manual page 35

[M403W/M363W/M323W/M403X/M363X/M323X/M283X/M403H/M323H]
1. Press the ▼ (
) button on the projector cabinet
with no menus displayed.
The Keystone screen will be displayed on the screen.
• Press the KEYSTONE button when using the remote
control.
2. Press the ▼ button to select [VERTICAL] and then
use the ◀ or ▶ so that the left and right sides of the
projected image are parallel.
* Adjust the vertical keystone distortion.
3. Align the left (or right) side of the screen with the
left (or right) side of the projected image.
• Use the shorter side of the projected image as the
base.
• In the right example, use the left side as the base.
4. Press the ▲ button to select [HORIZONTAL] and then
use the ◀ or ▶ so that the top and bottom sides of
the projected image are parallel.
• Adjust the horizontal keystone distortion.
5. Repeat steps 2 and 4 to correct keystone distor-
tion.
2. Projecting an Image (Basic Operation)
Screen frame
Align left side
24
Projected area