Chevrolet 2014 Camaro Owner's Manual page 209

Tire and Loading Information
Label
Label Example
A vehicle-specific Tire and
Loading Information label is
attached to the vehicle's center
pillar (B-pillar). With the driver
door open, the label is attached
near the door lock post. The Tire
and Loading Information label
shows the number of occupant
seating positions (1), and the
maximum vehicle capacity
weight (2) in kilograms and
pounds.
The Tire and Loading
Information label also shows the
tire size of the original
equipment tires (3) and the
recommended cold tire inflation
pressures (4). For more
information on tires and inflation
see Tires on page 10-48 and
Tire Pressure on page 10-56.
There is also important loading
information on the Certification
label. It tells you the Gross
Vehicle Weight Rating (GVWR)
and the Gross Axle Weight
Rating (GAWR) for the front and
rear axle. See Certification
Label later in this section.
Driving and Operating
Steps for Determining Correct
Load Limit
Locate the statement "The
1.
combined weight of
occupants and cargo should
never exceed XXX kg or
XXX lbs." on your vehicle s
placard.
Determine the combined
2.
weight of the driver and
passengers that will be riding
in your vehicle.
Subtract the combined
3.
weight of the driver and
passengers from XXX kg or
XXX lbs.
The resulting figure equals
4.
the available amount of cargo
and luggage load capacity.
For example, if the "XXX"
amount equals 1400 lbs. and
there will be five 150 lb
passengers in your vehicle,
the amount of available cargo
9-13