Advertisement
1. Attach Legs
•
Snap legs in place.
2. Attach Reflector
•
Remove reflector from case.
•
Attach reflector onto
threaded rod.
•
Fold over special catch,
securing reflector (Or place
wing nut on the top and
tighten).
3. Propane Tank
•
Hang propane tank using bracket provided.
•
Attach hose to propane tank, tighten securely.
•
Heater is now stabilized.
4. Attach Skirt
•
Wrap skirt around heater legs to cover propane tank.
•
Zip up and secure with velcro closure.
5. Light & Enjoy!
•
Turn on gas at propane tank.
•
Hold match under burner head.
•
Push and turn gas control knob to middle position.
•
After heater lights, hold down control knob for
15 seconds, release slowly and adjust heat.
Zubri Patio Heater
Assembly Instructions
From this.....To this... In 5 Easy Steps
• Easy Storage
• Easy to Transport
• Easy to Carry
www.schaeferfan.com
1-800-779-3267
©2005 Schaefer Ventilation Equipment
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Schaefer ZUBRI Z1-12
Summary of Contents for Schaefer ZUBRI Z1-12
-
Page 1: Assembly Instructions
Turn on gas at propane tank. • Hold match under burner head. • Push and turn gas control knob to middle position. • After heater lights, hold down control knob for 15 seconds, release slowly and adjust heat. www.schaeferfan.com 1-800-779-3267 ©2005 Schaefer Ventilation Equipment... - Page 2 ZUBRI Z1-12 PATIO HEATER Phone toll free: 1-800-779-3267 for assistance. Safety Guide 1. Your Zubri heater is designed for use with a 20 lb. LP cylinder. No other size is recommended. 2. Storage of your Zubri heater indoors is only permissible if the gas cylinder is disconnected and removed from the appliance.
Need help?
Do you have a question about the ZUBRI Z1-12 and is the answer not in the manual?
Questions and answers