Resetting The Ip Address - GE Security GE-DS-82 Installation Manual

3. After entering the username and password, the main screen appears as
shown in Figure 10.
Figure 10: Main Screen of the GE-DS-82
4. You can use the Web Management interface to continue the Switch
management. Please refer to the user manual for more information.
NOTE: For security reasons, please change and memorize the new password
after this first setup.

Resetting the IP Address

To reset the IP address to the default IP Address "192.168.0.100" or reset the
login password to default value. Press the hardware reset button on the front
panel for about 10 seconds. After the device has rebooted, you can login to the
WEB Management interface within the same subnet of 192.168.0.xx.
Figure 11: Reset button
8-Port 10/100Mbps + 2 Gigabit
Managed Switch
GE-DS-82
10 of 11
RESET
P/N 1069669-EN • REV 1.01 • ISS 24MAR10
LNK ACT
100
2 4 6 8
1 3 5 7
PWR