Enable Or Disable A Dmz - NETGEAR AC791L User Manual


To use MAC filtering to allow specific devices:
1. From the Jetpack Admin website home page, select Jetpack Settings > Advanced >
MAC Filter.
2. From the MAC Filter Mode menu, select White List (Allow only devices in list).
3. In the Name field, enter the name of the device.
4. In the MAC Address field, enter the MAC address of the device.
5. Click the Add button.
The device is added to the white list.
6. Click the Save button.
Your settings are saved.

Enable or Disable a DMZ

In a demilitarized zone (DMZ) network configuration, a computer runs outside the firewall in
the DMZ. This computer intercepts incoming Internet traffic, providing an extra layer of
protection for the rest of the network, and sending all incoming data to a particular IP
address.
If the DMZ is enabled, then incoming traffic is routed to the computer that uses the IP
address specified by the DMZ settings. If the DMZ is not enabled, the incoming traffic is
blocked.
1. From the Jetpack Admin website home page, select Jetpack Settings > Advanced >
Firewall.
2. Click the DMZ button.
The Destination IP address field appears.
Verizon Jetpack® 4G LTE Mobile Hotspot - AC791L
Control Internet Access
58