Install The Battery - iHealth BG1 Owner's Manual

• If you are experiencing symptoms that are inconsistent with your blood glucose test, and you
have followed all of the instructions provided in this Owner's Manual, contact your healthcare
professional immediately.
• Use only fresh whole blood samples to test your blood glucose.
• Do not use test strips that are expired or appear to be damaged as they may return inaccurate
results.
• Always use care when handling the iHealth Align Glucose Meter. Dropping or throwing the
meter may cause damage.
• Don't expose the iHealth Align Glucose Meter, test strips, or control solution to extreme
conditions such as high humidity, heat, freezing cold, or dust.
• The lancing device is for self-use only. Do not share or re-use lancets. Please refer to the
Lancing Device Manual for the detailed procedure.

INSTALL THE BATTERY

Your meter comes with two 3V CR1620 lithium batteries. Follow the instructions below to install the
battery.
1. Turn the meter over with the iHealth logo facing down.
2. Lift off the back cover by pulling firmly from the notch next to the test strip port.
3. Insert the new battery with the "+" side facing up and snap it into the battery tray.
4. Press the back panel back in place by inserting the front clip into place first before snapping the
back panel down.
5