Power Control Menu; Power Saving; No Signal Off; No Operation Off - Sharp AQuas LC-46E77UN Operation Manual

On-ScreEm Display Menu
Control Menu
Setup Menu
Power control setting allows you to save energy.
Example
AQUOS
EXIT
q
9
RETURN
o •
- FAVORITE CH -
0®@@
FREEZE MENU
O~
•
..
-..
,.,
(J v~
,eH
POWER
SAVING MUTE
@ -
0
[English]
etup
Example
EZ Setup
CH Setup
Antenna Setup-DIGITAL
Input Skip
Parental CTRL
Position
Language
Reset
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
TV Location: Select "Home" or "Store" for the location
where you plan to install the TV. This product qualifies
for ENERGY STAR V3.0 in Home mode default setting.
Home: "Power Saving" is set to "Advanced", and AV MODE is
set to "STANDARD".
Store: "Power Saving" is set to "Off" and AV MODE is set to
"DYNAMIC (Fixed)". Picture Reset and Feature Demo can be
set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)"
if there is no operation for 30 minutes. When "Off" is
selected, AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When "On" is selected, after all the settings
are completed, the Feature Demo screen is displayed if
there is no operation for several minutes.
• ENERGY STAR qualification is based on AV MODE
"STANDARD".
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
em
• See "Initial Setup" on page 14 for setting each item.
• If no channel is found, confirm the type of connection made
with your TV and try EZ Setup again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
EZSetup
1
Press MENU to display the MENU screen, and then
press ....
/~
to select "Setup".
2
Press
A/~
to select a specific adjustment item,
and then press ENTER.
• When you select "EZ Setup", "CH Setup", "Parental
CTRL" or "Reset", you can enter the 4-digit secret
number here. See page 25 for setting a secret number.
3
Press
./~
(or ....
/~)
to select the desired setting,
and then press ENTER.
4
Press MENU to exit.
EXIT
q-
9
RETURN
o
0
- FAVORITE CH -
0®@@
FREEZE MENU
O~.
'-I
aving
g [Off]
ff [Disable]
n Off [Disable]
ration Off
1
Press MENU to display the MENU screen, and then
press ....
/~
to select "Power Control".
2
Press
~~/~
to select a specific adjustment item,
and then press ENTER.
3
Press
~~/~
(or ....
/~)
to select the desired setting,
and then press ENTER.
4
Press MENU to exit.
~
This function allows you to set the Power Saving level
in order to decrease the power consumption and
increase the backlight lifespan.
Standard: Optimizes power reduction based upon video
content. When set to "Standard", "",, appears on the
screen.
Advanced: Optimizes power reduction based upon video
content and engages OPC. When set to "Advanced",
"~'"
appears on the screen.
Off: This function does not work.
IDD
• "Power Saving" does not function when you set "AV
MODE" to "DYNAMIC (Fixed)".
• You cannot select a different Power Saving item for each
AVMODE.
When "Power Saving" is set, the "OPC" settings for all AV
Modes will automatically change.
-If you set "OPC" to "On" when "Power Saving" is set
to "Standard", then the "Power Saving" setting will
chanl::je to "Advanced".
- When you change the "Power Saving" setting from
"Advanced" to "Off" or to "Standard", "OPC" will be set
to "Off".
-"DYt\IAMIC (Fixed)" will remain set to "Off".
• When "Power Saving" is set to "Standard" or "Advanced",
the Power Saving leaf icon appears to the left of "OPC" in
the Picture menu screen.
• You can select Power Saving by pressing POWER
SAVING on the remote control unit. (See page 17.)
1mImm· •
When set to "Enable". the power will automatically shut
down if there is no signal for 15 minutes.
IDD
• When it is 5 minutes before the power shuts down, the
remainin~1 time will start to keep appearing every minute.
• "Disable" is the factory preset value.
• When a 1V program finishes, this function may not operate.
mIi1m
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
IDD
• When it is 5 minutes before the power shuts down, the
remainin~l time will start to keep appearing every minute.
• "Disable" is the factory preset value.
I "
Power Control
•
• • •
. .
...
. . . . . . . 4