Using Digital Audio Output; Connecting Hdmi Equipment; Connecting A Pc - Sharp AQuas LC-46E77UN Operation Manual

Connecting to External Equipment
Using Digital Audio Output . .
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 30 for details.) PCM audio
outputs from the terminal.
To optical digital input of
external audio devices
D1Sg,~
Optical fiber cable
INPUT
~
9Of-
.....;(c_o_m_m_e_rc_ia_lI.;.y_a_va_i_la_b_le.;..) __
crm
• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HOMI
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.
Connecting HDMI Equipment
You can use the INPUT 5, INPUT 6, INPUT 7, INPUT 8 or INPUT 9 terminal when connecting HDMI equipment.
~
HDMI-certified cable
~
(_co_m_m_e_rc_ia_I_IY_a_V_ai_la_b_le_) _
HOM I
equipment
crm
• When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6.
When you input the audio signal via the AUDIO terminal with INPUT 6, set "PC Audio Select" to "Input 6 (HDMI)". (See page 28.)
• To enjoy the AQUaS 1080p display capability, connect your Blu-ray disc player or other external equipment using an HDMI-
certified cable and set the equipment to 1080p output.
Connecting a PC
When connecting to a PC with an analog RGB terminal (INPUT 4):
o
3.5 mm stereo minijack cable
(commercially available)
@~=---------------e:~-+
RGB cable
(commercially available)
PC
When connecting to a PC with an HOMI terminal (INPUT 5, 6,7,8 or 9):
HOM I-certified cable
(commercially available)
PC
I
Hill
,j-
:::::I----t
crm
• When connecting a PC to the INPUT 4, set "PC Audio Select" to "Input 4 (PC)". (See page 28.)
• When connecting a PC to the INPUT 6, set "PC Audio Select" to "Input 6 (HDMI)". (See page 28.)
• The HDMI terminals only support digital signal.
• Refer to page 42 for a list of PC signals compatible with the TV.
@-
13