Table of Contents
Advertisement
Wall Mounting the Repeater
You can mount the repeater directly to a wall using the horizontally
aligned mounting slots at the back of the repeater unit1 Before doing
this consider the following:
Avoid electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into
the wall1
Mount the repeater within distance of a working 240V AC power
outlet1
If mounting onto an outside wall, note that the repeater is
splashproof ONLY from the front side1
DO NOT expose the back of the repeater to outside weather
conditions1
11
Insert supplied two screws
into the wall, 60 mm apart1
(For best results, use a level
to ensure the screws are
even1) Remember to use
appropriate anchors for the
wall material1
21
Keeping the AC adapter
cord out of the way, place
the repeater over the screw
heads and slide it down into
place1
Desk Mount the Repeater
You can also desk mount the repeater by
inserting the desk mount stand into the slots
at the back of the unit1
3mm
60mm
8
27.5mm
Advertisement
Table of Contents
