Advertisement
before plugging in
Make sure your electricity supply is
G
the same as the one shown on the
hand blender.
Important - UK only
The wires in the cord are coloured
G
as follows:
Blue = Neutral
Brown = Live.
The appliance must be protected by
G
a 13A approved (BS1362) fuse.
Note:
For non-rewireable plugs the fuse
G
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it
G
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
G
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
key
hand blender
speed 1 button
turbo button
power handle
removable blender shaft with fixed
triblade.
beaker (if supplied)
whisk (if supplied)
whisk collar
wire whisk
chopper (if supplied)
chopper cover
finger grip
chopper blade
bowl
to use the hand blender
You can blend baby food, soups,
G
sauces, milk shakes and
mayonnaise.
for beaker blending (if beaker
supplied)
Don't fill the beaker more than
G
2/3rds full.
Note
If no beaker is supplied in your pack,
select a suitably sized container. We
would recommend a tall, straight
sided vessel with a diameter slightly
larger than the foot of the hand
blender to allow movement of the
ingredients but tall enough to
prevent splashing.
for saucepan blending
For safest use it is recommended to
G
take the pan off the heat and let hot
liquids cool to room temperature
before blending.
1 Fit the power handle inside the
blender shaft and turn to lock
2 Plug in.
3 Place the food into the beaker or a
suitably sized container, then holding
the container steady, press the
required speed button. (Select speed
1 for slower blending and to
minimise splashing and turbo for
faster blending).
To avoid splashing, place the
G
blade in the food before
switching on.
Don't let liquid get above the join
G
between the power handle and
blender shaft.
Move the blade through the food
G
and use a mashing or stirring action
to incorporate the mixture.
Your hand blender is not
G
suitable for ice crushing.
If your blender gets blocked, unplug
G
before clearing.
4 After use release the speed button.
Unplug and dismantle.
3
.
Advertisement
