SoundGraph Hummin’ 3.03 Quick Manual page 13

mainboard before) to the 24 pin cable of the power supply module. Arrange the cables
not to block proper operation of other components.
20. Connect 4 pin auxiliary power cable to mainboard
Connect the 4 pin auxiliary power cable from the power supply module to the 4 pin
auxiliary power connector on the mainboard.
21. Connect 9 pin USB cable from top cover
Connect the USB 9 pin cable (USB 9 Pin) from the top cover to the 9 pin USB connection
header on the mainboard
22. Mount optical disk drive (upper) and removable hard disk drive bay (lower)
-13-