Download Print this page

Polk Audio Omni P1 Setup Manual page 12

Hide thumbs Also See for Omni P1:

Advertisement

23. No naked flame sources, such as lighted candles,
should be placed on the apparatus.
[A
ljt6!FNJ
_A]
A
The lightning ftash with arrowhead symbol, within an equilateral
triangle,
is
intendad
to
alert the user to the prasence of
uninsulatad dangerous voltage within the product's enclosure
that may
be of
sufficient magnrtude to constrtute a risk of
electric shock
to
persons.
The exclamation point within an equilateral triangle is intendad
to
alert the user to the prasence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: Please refer to the information on exterior
bottom enclosure for electrical and Safety information
before installing or operating the apparatus.
WARNING: The mains plug is used as disconnect device,
the disconnect device shall remain readily operable.
EU Compliance Information
Eligible to bear the CE mark; Conforms to European Union
LowVoltage Directive 2006/95/EC; European Union EMC
Directive 2004/1 08/EC; European Union Restriction of
Hazardous Substances Recast
(RoHS2) Directive 2011/65/EC; European Union
WEEE Directive 2002/96/EC; European Union
Eco-Design Directive
2009/125/EC; European Union Registration, Evaluation,
Authorization and Restriction of Chemicals (REACH)
Directive 2006/121/EC; European Union Radio and
Telecommunications Terminal Equipment (R&TIE) Directive
1999/5/EC.
This product contains batteries that are covered
under the 2006/66/EC European Directive, which cannot
be disposed of with normal household waste. Please follow
local regulations.
You may obtain a free copy of the Declaration of
Conformity by contacting your dealer, distributor, or
Polk's worldwide headquarters. Contact information can be
found here: www.polkaudio.com
4
1-Year Limited Warranty
Polk Audio, LLC ("Polk") warrants to the original retail
purchaser that Polk Audio branded wireless speakers,
including the Omni series (collectively "product"), will be
free from defects in materials and workmanship for a
period of (1) one year, under normal use and conditions.
Should this product prove to be defective in material or
workmanship, Polk will, at its option, (a) repair the product,
or (b) replace the product. If the product model is no
longer available and cannot be repaired effectively, or
replaced with an identical model, Polk may, at its sole and
absolute option, replace the unit with a current model of
equal or greater value.
To obtain warranty service, please visit the Polk Audio
website at www.polkaudio.com. You may also contact
Polk Audio Customer Service at 1-800-377-7655 for
instructions on where to send the product. You will
be required to provide an original receipt or bill of sale,
identifying you as the original purchaser and identifying the
purchase made through an authorized Polk retailer. You will
need to ship the product, prepaid and insured, together
with the proof of purchase to Polk Audio, 1 Viper Way,
Vista, CA 92081. Risk of loss or damage in transit shall
be borne by the purchaser. Freight collect shipments will
be refused.
This warranty is non-transferable and does not apply to
any product that has been modified or used in a manner
contrary to its intended purpose. This limited warranty is
void if the product has an altered or missing serial number,
or if the product was purchased from someone other than
an authorized dealer. This limited warranty is void if the
product has been damaged by accident or unreasonable
use, neglect, improper service or other causes not arising
out of defects in material or construction. Product(s) which
are found to be damaged by abuse resulting in thermally
damaged voice coils are not covered by this warranty
but may be replaced at the sole and absolute discretion
of Polk. This warranty terminates if you sell or otherwise
transfer the product to another party. This limited
warranty does not cover cosmetic damage, paint damage,
damage to other components, parts or premises, or any

Advertisement

loading