Conair infiniti PRO CD203 Instruction & Styling Manual page 6

NOTE: Curl Secret's new brushless motor technology uses magnets instead of brushes to sense any
change in speed, and turns itself off as an added safety feature and to ensure tangle-free curling
action. Minimizes weight, maximizes curl control, and significantly extends the life of your appliance.
NOTE: If you continue to hold the hair section after closing the handle, Curl Secret will stop and beep
to indicate that you must release the tension on the hair. If you have taken too much hair, or hair is
not neatly going through the center of the appliance, the Curl Secret will again stop and beep to
indicate a problem. This safety feature ensures there will be no tangles.
MOST IMPORTANT: If hair does get tangled, unplug the unit and gently work the hair out
of the unit. Take very small strands one at a time and slowly remove from the chamber. If hair is
tight around the barrel, carefully and gently loosen up hair outside of the tool with your fingers
removing small sections at a time. Make sure fingers do not come in contact with heated chamber.
• The hair is automatically drawn into the ceramic curl chamber, where it is softly held and heated
from all directions to effortlessly form the curl.
• If you are using the timer setting, the automatic beep indicator will start as soon as the handles are
closed together. There will be a series of individual beeps. Hold the styler still, with the handles held
together, until the end of the individual beeps. There will then be four quick beeps in succession. This
indicates that the time is up and you can remove the styler from your hair.
NOTE: Always release the handles first to set the curl free; if you pull away before you open the
handles, the curl will be straightened out.
• To allow the curl to set, do not comb or brush the hair until it cools.
• Repeat around the head until you have the amount of curls desired.