Before First Use; Using As A Stick Mixer; To Attach The Blending Leg - Breville Control Grip BSB510 Instruction Booklet

ASSEMBLy & OPERATION

BEFORE FIRST USE

Remove any packaging material and
promotional labels. Remove the blending
leg from the mixer motor body and wash
it in warm soapy water (refer to assembly
instructions in this booklet). Rinse and dry
thoroughly. Ensure no water remains inside
the blending leg to avoid water running into
the motor body when reattached.
Disassemble and wash the chopping blade,
chopper bowl, chopper bowl lid, whisk,
storage lid, and blending jug in warm soapy
water, rinse and dry thoroughly. Ensure no
water remains on the chopper bowl lid or
whisk attachment to avoid water running
into the motor body when reattached.
NOTE
The detachable blending leg, chopping
bowl, chopping blade, blending jug,
whisk and dual purpose storage lid/
anti-slip mat can also be washed in
the dishwasher. The chopper bowl lid,
whisk gearbox and motor body are
not dishwasher safe – see the care and
cleaning section of this booklet for
cleaning instructions of these parts.
This stick mixer is a versatile appliance
that can be attached to:
• The stainless steel blending leg– for use
as a stick mixer
• The chopper bowl with chopping blade
and lid – for use as a mini chopper
• The whisk attachment – for use as a
hand whisk

TO ATTACH THE BLENdING LEG

Hold the blending leg with the blades down,
and align the top end of the blending leg
with the corresponding end of the motor
body and push until the blending leg 'clicks'
and locks onto the motor body.
BSB510_IB_B11_FA.indd 9
Always ensure blending leg is dry, and no
water left inside, before reattaching.

USING AS A STICK MIxER

Ensure the blending leg is assembled to the
motor body as detailed above.
1. Place food to be processed into the
blending jug provided (or a sufficiently
large mixing bowl or saucepan). The jug
provided should be only be ½ full or less
when blending liquids or when making a
puree of fruit and/or vegetables.
2. Insert the plug into a 230/240V power
outlet and turn the power on.
3. By turning the dial at the top of motor
body, select a speed between 1 and 15.
Low Speed : 1
High Speed : 15
NOTE
If selecting a high speed, it is
recommended that you start with a
slow speed and gradually increase to
the higher speed to avoid splattering
and over-processing.
4. Place the blending leg as deeply as
possible into the jug and press the
trigger switch to turn the stick mixer on.
The button must be held for the required
duration of operation.
9
11/04/11 4:04 PM