Custom Function Settings; C.fn I: Exposure - Canon EOS 6D Instruction Manual

3
Custom Function SettingsN

C.Fn I: Exposure

C.Fn I -1
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. This is effective when
you prefer to control the exposure in less fine increments than 1/3-stop
increments.
With setting 1, the exposure level will be displayed in the viewfinder and on
the LCD monitor as shown below.
C.Fn I -2
0: 1/3-stop
1: 1-stop
C.Fn I -3
0: On
When you set the power switch to <2>, the AEB and white balance
bracketing settings will be canceled. AEB will also be canceled when the flash
is ready to fire or if you switch to movie shooting.
1: Off
The AEB and white balance bracketing settings will not be canceled even if
you set the power switch to <2>. (If the flash is ready to fire or if you
switch to movie shooting, AEB will be canceled temporarily, but the AEB
range will be retained.)
304
Exposure level increments
ISO speed setting increments
Bracketing auto cancel