Auto Correction Of Brightness And Contrast - Canon EOS 6D Instruction Manual

3
Auto Correction of Brightness and ContrastN
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. This function is called Auto
Lighting Optimizer. The default setting is [Standard]. With JPEG
images, the correction is applied when the image is captured.
In Basic Zone modes, [Standard] is set automatically.
If [z4: Highlight tone priority] is set to [Enable], the Auto Lighting
Optimizer will be set automatically to [Disable] and the setting cannot be
changed.
Depending on the shooting conditions, noise may increase.
If a setting other than [Disable] is set and you use exposure compensation or
flash exposure compensation to darken the exposure, the image may still come
out bright. If you want a darker exposure, set this function to [Disable].
If the HDR mode (p.155) or multiple exposure shooting (p.158) is set, the
Auto Lighting Optimizer will be set automatically to [Disable]. When the
HDR mode or multiple exposure shooting is canceled, the Auto Lighting
Optimizer will revert to the original setting.
In step 2, if you press the <B> button and uncheck <X> the [Disabled
in M or B modes] setting, the Auto Lighting Optimizer can be set in the
<a> and <F> modes.
1 Select [Auto Lighting Optimizer].
Under the [z3] tab, select [Auto
Lighting Optimizer], then press
<0>.
2
Select the setting.
Select the desired setting, then press
<0>.
3
Take the picture.
The image will be recorded with the
brightness and contrast corrected if
necessary.
125