Table of Contents
Advertisement
Setting the GPS Position
Setting a GPS position is useful if you are not getting satellite information quickly because the
Magellan RoadMate has travelled over 500 miles while turned off. Setting the GPS position will
allow the Magellan RoadMate to compute which satellites are available and calculate the position
quicker.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap GPS Options.
3.
Tap Set GPS Position.
4.
Follow the prompts to enter the address where you currently are.
5.
Tap Done when finished entering the address.
Backing Up and Restoring Data
Backup and restore provides a way of storing the address book and other data to a SD/MMC card.
When the data has been backed up, it can be restored at any time. Please note that when you
restore from backed up data, address book and other data will be replaced with the data. The
Magellan RoadMate cannot append backed up data to your existing data.
Backing Up Data
1.
From page 2 of the Main Menu, tap User Options.
2.
Insert a SD or MMC card with available space into the SD slot of the Magellan RoadMate.
Note that backing up data will overwrite any back up files on the SD or MMC card.
3.
Tap Backup and Restore.
4.
Tap Backup.
5.
Confirm backup. Tap Yes.
6.
Operation successful! Tap OK.
7.
Tap Back arrow to exit.
Restoring Data
1.
From page 2 of the Main Menu, tap User Options.
2.
Insert a SD or MMC card with available space into the SD slot of the Magellan RoadMate.
Note that backing up data will overwrite any back up files on the SD or MMC card.
3.
Tap Backup and Restore.
4.
Tap Restore.
5.
Confirm restore. Tap Yes.
User Options
58
Advertisement
Table of Contents
