Still Images - Canon PowerShot SX410 IS User Manual

ç Contents
Still Images/Movies
● If the camera is turned on while the [
the camera will no longer sound. To activate sounds again, press
the [
press the [ ][ ] buttons to choose [Off].

Still Images

● A blinking [
blurred by camera shake. In this case, mount the camera on a
tripod or take other measures to keep it still.
● If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see "Flash Range" ( = 242).
● The subject may be too close if the camera only beeps once
when you press the shutter button halfway. For details on the
focusing range (shooting range), see "Shooting Range" ( = 243).
● To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
● A blinking [ ] icon displayed when you attempt to shoot indicates that
shooting is not possible until the flash has finished recharging. Shooting
can resume as soon as the flash is ready, so either press the shutter
button all the way down and wait, or release it and press it again.
● Although you can shoot again before the shooting screen is displayed,
your previous shot may determine the focus, brightness, and colors used.
Downloaded From camera-usermanual.com Canon Manuals
3) Finish shooting.
● Press the movie button again to
stop shooting. The camera beeps
twice as recording stops.
● Recording will stop automatically
when the memory card becomes full.
] button and choose [Mute] on the [
] icon warns that images are more likely to be
] button is held down,
] tab, and then
58