ç Contents
●
If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in
the areas in focus when you press the shutter button halfway.
If faces are not detected when Servo AF ( = 114) is set to [On],
●
the AF frame is displayed in the center of the screen when you
press the shutter button halfway.
●
Examples of faces that cannot be detected:
-
Subjects that are distant or extremely close
-
Subjects that are dark or light
-
Faces in profile, at an angle, or partly hidden
●
The camera may misinterpret non-human subjects as faces.
●
No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
Downloaded From camera-usermanual.com Canon Manuals
1
Choose [Tracking AF].
●
Follow the steps in "Changing
the AF Frame Mode" ( = 110) to
choose [Tracking AF].
●
[ ] is displayed in the center of the
screen.
Still Images
112
Movies