Sunfire TGR-3 User Manual page 16

CHAPTER 2
Digital audio and component video connections
Component video signals
From: DVD Player component
video outputs
To: TGR-3 DVD component
video inputs
16
Digital audio signals
From: DVD Player coaxial
digital audio outputs
To: TGR-3 DVD coaxial
digital audio inputs
If your DVD and TV Monitor both
have com po nent-video, they can be
connected as shown, giving a superior
picture.
The digital output from the DVD
player must be con nect ed to the
digital inputs of the TGR-3. This is the
only way the TGR-3 can receive and
decode Dolby Digital or DTS signals.
It is best to use a coaxial digital cable
to make the connection to the TGR-3,
rather than a standard audio cable.
If your DVD or video
component has an
HDMI output, connect
it to one of these inputs
with an HDMI cable
Component video signals
from TGR-3 Component video outputs
to TV Monitor's Component video inputs
Connect your TV's HDMI input here.
Note: you must also connect the
player's two-channel audio outputs if
you want it to play it in Zone 2 when
the Main Zone is playing a different
source.
User's Manual