Map Area Switching; Preparing Navigation Computer For 750; In-Vehicle Fixed Installation - Magellan 750M Installation & Reference Addendum

Vehicle navigation made portable
Table of Contents

Advertisement

TIP
TIP
Battery capacity degrades at low temperatures and over the life of the system.
In the event that the vehicle power port is unusable, such as a blown fuse, or if required for
an airport security check, the 750
periods up to 1 hour. To do so, simply slide the Battery Charger switch to 'BATTERY'. Be
certain to slide the Battery Charger switch back to 'OFF' or 'AUTO' when finished to avoid
depleting the Battery.

Map Area Switching

The 750
incorporates a feature called 'Auto Map Switching'. When the 750
M
from one Map Area to another, it will automatically sense the change and then switch to the
correct Map Area within several minutes if other Map Areas have been purchased and
unlocked. In the event that the 750
can be easily done as follows:
Step 1: Refer to Map Area illustration on page 27.
Step 2: Press OPTION to arrive at the 'User Options' screen.
Step 3: Scroll to the 'Configuration' icon, press ENTER.
Step 4: Scroll to 'Map Selection', press ENTER.
Step 5: Scroll to the desired Map Area and confirm that map is unlocked. If not, call
Magellan Customer Service at 1-877-4CARNAV (1-877-422-7628), otherwise, press
ENTER.
Step 6: The 750
M
The 750
will power down to save this change and will restart automatically. Select desired
M
user and continue enjoying the 750
Preparing Navigation Computer for 750NAV In-Vehicle Fixed Installation
After use of 750
NAV
returned to the 750
Step 1: Proceed to the "User Options" Menu, press OPTION.
Step 2: Scroll to the 'Configuration' icon, press ENTER.
Step 3: Scroll to 'Vehicle Select', press ENTER.
Step 4: Scroll to and highlight 'System' and choose 750NAV by pressing ENTER .
Step 5: Scroll to and highlight, 'Save', press ENTER.
Step 6: Shutdown, press POWER.
The Navigation Computer is ready for return to the 750
can be used solely from a new, fully charged Battery for
M
needs to be manually switched to a different Map Area, it
M
will ask "Confirm Map Change". Highlight 'Yes', press ENTER.
.
M
Navigation Computer in a 750
mode. This is done as follows:
NAV
configuration, the Vehicle Type must be
M

In-Vehicle Fixed Installation.

NAV
19
is transported
M

Advertisement

Table of Contents
loading

Table of Contents