Replacing A Leg; Appending A Leg; Appending A Newly Created Waypoint To A Route; Reversing A Route - Magellan 310 User Manual

Replacing a Leg — Replaces the destination of an existing leg with a
new destination.
Select route to be edited.
See Instructions for
Viewing a Route
Appending a Leg — Adds a leg to the end of a route.
Select route to be edited.
See Instructions for
Viewing a Route
Appending a Newly Created Waypoint to a Route — Allows a newly
created waypoint to be appended to any route in memory.
Create a Waypoint by pressing the GOTO button.
Can be present position, user-generated position
or by using Map Cursor to locate position.
Reversing a Route — Allows any route in memory to be reversed. In the
example used earlier of "A" to "B" to "C" to "D", if this route were
reversed it would end up as "D" to "C" to "B" to "A".
From
Any
Screen
Magellan SporTrak GPS Receiver
Highlight
Replace
Select
Waypoint
Highlight next available
Select
Database
Highlight
Edit/Modify
"Route"
Waypoint as
Button
desired.
Highlight
Routes
Highlight
Reverse
Highlight destination
waypoint for leg that will
be replaced.
Select
Database
leg. (Indicated by
dashes)
Select
Waypoint
Select
Route
Select
Route
Reference
47