Twist Ice - Matic; Ice Container - Beko RDNE400K30ZX User Manual

Operating the product
5.6. Twist Ice – matic
(This feature is optional)
• Remove the water tank by rotating
it to the left.
• Open the water tank cover by
turning it and add water to the
water tank up to the lower part of
the water tank cover.
• Place the water tank on its place as
shown in the figure after adding
water and have it seated by rotating
it on the direction of the arrow.
Water shall be poured down to the
icebank.
• When ice has formed, rotate
icebank knob in the direction of
the arrow to allow that the ice is
dropped down to the ice drawer.
• Take the ice cubes by pulling ice
drawer out.
• Pull the front face towards you in
order to wash the icebank, and put
it on the slides on the interior area
and push it to its place in order to
replace it.
• Pull the twist icematic unit towards
you in order to remove the unit, and
put it on the slides on the ceiling
and push it to its place in order to
replace it.

5.7. Ice container

• Remove the ice container from the
freezer compartment.
• Fill the ice container with water.
• Place the ice container in the
freezer compartment. About two
hours later, the ice is ready.
Refrigerator / User Manual
21/37EN