Places; Creating A Go To To A Place; Trail; Activating A Trail - Magellan 300 User Manual
Magellan user manual gps receiver triton 200, 300, 400, 500
Hide thumbs
Also See for 300:
- Viitetiedot (100 pages) ,
- Manuel de fonctionnement (90 pages) ,
- Referenzhandbuch (90 pages)
Table of Contents
Advertisement
Places
Creating a Go To to a Place
1.
Access the Main Menu and select "Go To".
2.
Select "Place" from the Go To menu.
3.
Select the map to be used. (Basemaps contain limited places to
select from. Detailed maps include a wide variety of points of
interest.)
4.
If "Detailed Map" is selected, choose a detailed map and press
Enter.
5.
Select a category and press Enter.
6.
Select a subcategory, if required, and press Enter.
7.
Select a place from the list and press Enter.
8.
The Place Information screen is displayed. To activate the Go To, highlight
Enter.
9.
Highlight
Trail
Activating a Trail (Not available in initial software release. Check www.magellanGPS.com/
support for software updates.)
1.
Access the Main Menu and select "Go To".
2.
Select "Trail" from the Go To menu.
3.
Select a saved trail from the list and press Enter. Select
and press Enter.
4.
The Trail Information screen is displayed.
Highlight "View on Map" and press Enter to get a graphical view
of the trail.
Highlight "View Vertical Profile" and press Enter to get a
graphical representation of the elevation levels found on the trail.
5.
To activate the trail, select
6.
Highlight
Go To Menu
and press Enter.
.
and press Enter.
and press
14
Advertisement
Table of Contents
