Fiat 2014 500 Abarth User Manual page 65

Hide thumbs Also See for 2014 500 Abarth:
Table of Contents

Advertisement

WHAT TO DO IN EMERGENCIES
• After the event occurs, when the system is active, the message "Fuel Cutoff See
Handbook" is displayed.
• Carefully check the vehicle for fuel leaks in the engine compartment and on the
ground near the engine compartment and fuel tank before resetting the system
and starting the engine.
NOTE:
In order to start the engine and move the vehicle to a safe location after an impact, the
System Reset Procedure must be completed.
System Reset Procedure
• After an impact causing air bag deployment, the left and right turn signal lights,
located in the instrument panel cluster, will both be blinking until the ignition is
turned off.
• In order to move your vehicle to the side of the road you must follow the system
reset procedure.
Customer Action
1. Turn ignition OFF. (Turn Signal
Switch must be placed in Neutral
State).
2. Turn ignition ON.
3. Turn Right Turn Signal Switch ON.
4. Turn Left Turn Signal Switch ON.
5. Turn Right Turn Signal Switch ON.
6. Turn Left Turn Signal Switch ON.
7. Turn Left Turn Signal Switch OFF.
(Turn Signal Switch must be placed in
Neutral State).
8. Turn ignition OFF.
9. Turn Hazard Flashers OFF (manually).
• If a reset procedure step is not completed within 45 seconds, then the turn signal
lights will turn off and the reset procedure must be performed again in order to be
successful.
Customer Will See
Left Turn Light is OFF. Right Turn Light
BLINKS.
Right Turn Light is ON SOLID. Left Turn
Light BLINKS.
Left Turn Light is ON SOLID. Right Turn
Light BLINKS.
Right Turn Light is ON SOLID. Left Turn
Light BLINKS.
Left Turn Light is ON SOLID. Right Turn
Light is ON SOLID.
Left Turn Light is OFF. Right Turn Light
is OFF.
System is now reset and the engine
may be started.
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents