Distributing The Sealant - Mini CLUBMAN Owner's Manual

Stowing Mobility System
1. Unscrew filler hose 2 of the sealant bottle
from the wheel.
2. Unscrew connecting hose of the
compressor 6 from the sealant bottle.
3. Connect the filler hose 2 of the sealant bot-
tle to the unoccupied connection on the
sealant bottle.
This prevents the rest of the sealant from
escaping from the bottle.
4. Wrap the empty sealant bottle in suitable
material to avoid dirtying the cargo area.
5. Stow Mobility System back in the vehicle.

Distributing the sealant

Immediate drive approx. 3.1 miles/5 km so that
the sealant evenly distributes itself.
Do not exceed speeds of 50 mph/
80 km/h.
If possible, do not drop below 10 mph/
20 km/h.<
Adjusting the tire pressure
1. After driving approx. 3.1 miles/5 km or
10 minutes, stop at a suitable location.
2. Screw the connection hose 6 of the com-
pressor directly onto the tire valve.
3. Insert the plug 5 into the power socket in
the vehicle interior.
4. Correct inflation pressure to 26 psi/180 kPa.
With the engine running:
>
To increase the inflation pressure: switch on
the compressor. To check the current infla-
tion pressure, switch off the compressor.
Do not run the compressor for longer
than 10 minutes; otherwise, the
device will overheat and possibly be dam-
aged.<
>
To decrease the inflation pressure: press the
release button 9.
Online Edition for Part no. 01 40 2 607 388 - © 03/11 BMW AG Online Edition for Part no. 01 40 2 607 388 - © 03/11 BMW AG
Replacing components
If the tire cannot maintain the inflation
pressure, drive the vehicle again, refer to
Distributing the sealant. Then repeat steps
1 to 4.
If an inflation pressure of 26 psi/180 kPa still
cannot be reached, the tire is too heavily dam-
aged. Contact the nearest MINI
Driving on
Do not exceed the permitted maximum
speed of 50 mph/80 km/h; doing so may
result in an
Replace the defective tire as soon as possible
and have the new wheel/tire assembly bal-
anced.
Have the Mobility System refilled.
Changing wheels
Run-flat tires*
Tire change for run-flat tires:
> Prepare for tire change, page
> Jack up vehicle, page
>
Tighten lug bolts, page
Space-saver spare tire*
Tire change with space-saver spare tire:
> Remove the space-saver spare tire,
page 215
>
Prepare for tire change, page
>
Jack up vehicle, page
> Mount space-saver spare tire, page
> Tighten lug bolts, page
>
Drive with space-saver spare tire, page
Removing the space-saver spare tire
The space-saver spare tire is located under the
tire change set in the cargo area.
MOBILITY
dealer.<
accident.<
216
217
216
217
216
216
217
216
215