Rear Panel Description - Macsense MIH-130 User Manual

Rear Panel Description

LAN
LAN Ethernet Ports - Four 10/100BASE-T Ethernet network (RJ-
45) ports used for linking hub/computer in a Local Area Network to the
XRouter Pro.
WAN Ethernet Port - One Wide Area Network port for connecting
the XRouter Pro to the Internet via a cable or DSL modem.
Reset Button - Used for resetting the XRouter Pro's IP Address
information and user password to the factory default settings.
5VDC Power Adapter Receptacle - Plug the power adapter cable
into this port to supply power to the XRouter Pro unit.
Uplink Switch - Used to determine the configuration of the
XRouter Pro's LAN port No. 4. Choose either parallel (normal) for con-
necting LAN computers to the XRouter Pro or crossover mode (uplink)
for daisy-chaining a series of hubs to the XRouter Pro.
WAN
Reset
30
Appendix B