Mac Os Tcp/Ip Configuration - Macsense MIH-130 User Manual

Mac OS TCP/IP Configuration

1. Open the TCP/IP control panel.
2. In the Connect via menu select the Ethernet interface that is
installed on your computer.
3. In the Configure pull-down menu that appears, select Using
DHCP Server to allow the built-in DHCP server of the XRouter
Pro to assign an IP address and other TCP/IP configuration
information to the client automatically. Do this for each client
that needs Internet access through the XRouter Pro.
(Note: The DHCP Client ID field is not require to connect to
the XRouter Pro. It is normally used to identify computers in a
DHCP network. If you desire to input the name of computer in
this field, you may. )
4. Close the TCP/IP window and save the changes.
Easy Installation
12