Macsense MIH-130 User Manual page 12

2. Plug one RJ-45 connector (of a standard twisted-pair Ethernet
cable) to the XRouter Pro's No. 4 LAN port.
3. Plug the other end of this Ethernet cable into an available port
on the network hub.
(NOTE: Multiple network hubs can be connected to the
XRouter Pro's LAN ports No.1-3 if these hubs are equipped
with uplink ports. By daisy-chaining a series of hubs, you can
connect up to 252 users to the XRouter Pro.)
LAN
Connecting the Power Supply
To provide your XRouter Pro with power:
1. Plug the power adapter of the XRouter Pro into an AC power
outlet.
2. Plug the other end of the power adapter cable into the power
receptacle on the rear panel of the unit.
3. The Power LED on the XRouter Pro's front panel should be lit
immediately.
Easy Installation
WAN
Reset
7