Restore Factory Settings; Troubleshooting; The Device Cannot Be Turned On; The Battery Cannot Be Charged - Silvercrest SSMT 1000 A1 User Manual And Service Information

2. PIN
Here you can change your PIN. To do so first enter the old PIN and then the new PIN. To confirm, the new PIN must
be entered a second time. Confirm the entry of the PIN by pressing the call key [14].

6. Restore factory settings

This function restores the device to its original condition. To do so, enter the phone lock code (pre-programmed to
1122) and confirm the entry by pressing the call key [14]. Confirm that you want to restore the factory settings with
the call key [14] or press the end key [9] to cancel. When the factory settings are restored the device will restart.

Troubleshooting

The device cannot be turned on

1. Check whether the battery is charged. If necessary charge the battery.
2. Check that the battery is inserted correctly.

The battery cannot be charged

1. Check if the mains charger is correctly connected to the charging station and the phone is correctly inserted
in the charging station. If necessary plug the mains charger directly into the phone to charge it.
2. Check the battery and if necessary insert a new battery.
3. If the battery is fully discharged it can take a while before it begins to charge. Connect the mobile phone to
the charger and wait a few minutes until it begins to charge.
SSMT 1000 A1 mobile phone
English - 61