Charging The Battery; Using The Charging Station; Using The Mains Charger; Connecting The Headset - Silvercrest SSMT 1000 A1 User Manual And Service Information

Charging the battery

The battery of the SilverCrest SSMT 1000 A1 mobile phone can either be charged using the charging station or the
mains charger. Fully charge the mobile phone before use. When the battery is empty this is indicated with the
icon on the screen of the mobile phone.

Using the charging station


Insert the small plug of the mains charger into the charging station's socket.

Then insert the mains charger into a mains socket.

Place the mobile phone on the charging station. The battery will begin to charge and this is shown on the screen
of the mobile phone.

When the battery is fully charged this icon
charging station and unplug the mains charger from the mains socket to save energy.

Using the mains charger


Insert the small plug of the mains charger into the charging socket [12] on the mobile phone.

The battery will begin to charge and this is shown on the screen of the mobile phone.

When the battery is fully charged this icon
mains charger and unplug the mains charger from the mains socket when not in use to save energy.

Connecting the headset

The headset is not supplied. A headset may be connected to the SilverCrest SSMT 1000 A1 mobile phone. Only use
headsets with a 3.5 mm jack plug.
is shown on the screen. Then remove the mobile phone from the
is shown on the screen. Disconnect the mobile phone from the
SSMT 1000 A1 mobile phone
English - 23