Toshiba XDE600KE Owner's Manual page 34

34
Downloaded From Disc-Player.com Toshiba Manuals
Function setup
Customizing the Function Settings (continued)
Setting details
Video out
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the /
out.
4) Press ENTER button, then use the
select the output mode (Component, RGB, P-Scan or
HDMI).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Aspect Ratio
TV System
Video out
HDMI Resolution
JPEG Interval
Picture Modes
Component:Select if you connect the DVD to your TV
which has component video inputs.
RGB: Select if you connect the DVD to your TV which has
RGB inputs by scart cable.
P-Scan: Select if you connect the DVD to your TV which
has component video inputs that support progressive
scan.
HDMI: High Defi nition Multimedia Interface. Select if you
connect the DVD to TV via HDMI input.
HDMI Resolution
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the /
Resolution.
4) Press ENTER button, then use the
the options (Auto, 480p/576p, 720p, 1080i, 1080p or
1080p/24F).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Aspect Ratio
TV System
Video out
HDMI Resolution
JPEG Interval
Picture Modes
Notes
• When TV System is set to PAL or Auto, you cannot select
the "1080p/24F".
• If the Video Output is not set to "HDMI", you cannot select
the "HDMI Resolution".
• When the picture mode is Sharp, Colour or Contrast, the
HDMI resolution cannot be set to 480p/576p and 720p.
• Select the HDMI resolution according to the performance
of the connected TV.
JPEG Interval
1) Press SETUP button.
2) Press
button to select Video
3) Press
JPEG Interval.
/ button to
4) Press ENTER button, then use the
and change the JPEG Interval.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Off:
5 seconds: Plays back images in the form of a slide show
: 16 : 9
: Auto Fit
10 seconds: Plays back images in the form of a slide show
: PAL
15 seconds: Plays back images in the form of a slide show
RGB
P-Scan
HDMI
: NATURAL
Picture Modes
1) Press SETUP button.
2) Press
3) Press
Picture Modes.
4) Press ENTER button, then use the
button to select HDMI
picture mode (Sharp, Colour, Contrast or Off).
5) Press ENTER button.
/ button to select
6) Press SETUP button to exit the menu.
Sharp:
Colour:
Contrast:
: 16 : 9
Off:
: Auto Fit
: PAL
Auto
480p/576p
720p
1080i
1080p
: NATURAL
Notes
• Picture Modes is only available when the Video out is
set to "HDMI" and outputs via HDMI.
• If HDMI resolution is set to 480p/576p or 720p, the
Picture Modes cannot be activated.
/ button to select Video.
button, then use the / button to select the
/ button to shift
Plays back one fi le at a time.
at 5 seconds interval.
at 10 seconds interval.
at 15 seconds interval.
Aspect Ratio : 16 : 9
: Auto Fit
TV System
: PAL
: HDMI
Video out
Off
HDMI Resolution
5 seconds
JPEG Interval
10 seconds
Picture Modes : NATURAL
15 seconds
/ button to select Video.
button, then use the / button to select
/ button to select
Select this to make the picture sharper.
Select this to make the picture sharper with
enhanced colour.
Select this to make the picture sharper with
bigger contrast.
Select this to follow the original picture
setting.
Aspect Ratio : 16 : 9
: Auto Fit
TV System
: PAL
: HDMI
Video out
Sharp
HDMI Resolution
Colour
JPEG Interval
Contrast
Picture Modes
Off