To operate the Tuff-Cam 2 as a PC-Cam (web cam), select "Install
PC-Cam Driver"
To install the ULead Photo Explorer 8.6 photo and video editing
software, select "Install ULead Photo Explorer"
When all required software has been installed, press "Exit" to finish
the installation.
Following installation of the drivers, connecting the Tuff-Cam 2 to
the PC (in PC-Cam mode) will automatically start a mini-application
"Image Download Utility". You can use this to download images
and videos to the PC, even if you are in PC-Cam mode.
Specifications
Sensor: 5 MP CMOS
Display: 2 inch, 640 x 240 TFT
Internal storage: 32 Mb
Additional storage: SD Card slot supports up to 2GB
Built-in Li-Ion battery: 3.7V, 2200mAh
Battery life: 9 hours continuous video or over 2 years in standby
Still resolution up to 12 MP by interpolation
Video: 640x480 at 19 frames/sec
8 x digital zoom on photo and video
Audio and video playback
TV-Out (PAL or NTSC) with AV cable provided
Switch input (standard 3.5mm mono jack socket)
USB 2.0 high-speed interface
Date & Time stamping (selectable)
Troubleshooting
Tuff-Cam 2 is designed to work reliably and predictably in
normal conditions. However, it is possible that problems may
Primary ICT Ltd - www.primaryict.co.uk