Warranty & Support This product is provided with a one year warranty for problems found during normal usage. Mistreating the Tuff-Cam 2 or opening the unit will invalidate this warranty. Any data stored on the unit and any consequential loss is not covered by this warranty. The battery is not user replaceable.
Page 2
® Tuff-Cam Recordable magnifier, ideal for capturing observations USER GUIDE...
Page 3
Please retain these instructions for future reference. Rechargeable batteries are only to be charged by an adult Tuff-Cam 2 contains a replaceable, rechargeable battery. Do not mix different types of battery or new and used batteries. Batteries are to be inserted with the correct polarity...
Press the shutter button again to end the recording. NB. Alternatively you can also press and hold the trigger button and Tuff-Cam 2 will take a video for the whole time that the button is pressed (memory permitting). Displaying the Photos & Videos Slide the Mode switch to PLAY.
Tuff-Cam ® SD Card The SD card slot can be accessed by unscrewing the security screw and removing the battery cover. This should be done by an adult. The SD card (not supplied) can be removed and inserted into the relevant reader on some PCs and laptops.
Volume: 1 to 8 Connecting to a PC or Apple Mac There are two modes in which the Tuff-Cam 2 can connect to a PC: MSDC or PC-CAM. In MSDC mode, the PC or Mac will recognise the device as a USB mass storage device and it will appear as a removable drive in the file explorer window.
Windows 98 systems and allows the system to download data files directly from the Tuff-Cam 2. If you use Tuff-Cam 2 as a PC-Cam (web cam) or use the ULead Photo Explorer software, then you need to install the software from the CD.
Tuff-Cam ® Specifications Sensor: 5 MP CMOS Display: 2 inch, 640 x 240 TFT Internal storage: 32 Mb Additional storage: SD Card slot supports up to 2GB Built-in Li-Ion battery: 3.7V, 2200mAh Battery life: 9 hours continuous video or over 2 years in standby Still resolution up to 12 MP by interpolation Video: 640x480 at 19 frames/sec 8 x digital zoom on photo and video...
Troubleshooting Tuff-Cam 2 is designed to work reliably and predictably in normal conditions. However, it is possible that problems may occur. Please check the following before contacting technical support: Technical Specification Static discharge causes the unit to malfunction Problem Press the reset button near LED for 5 secs...