RETURN
[Front]
ENTER
uiop
[MODE
SELECTOR 1]
[Rear]
MENU
ENTER
uiop
RETURN
About the button names in these explanations
<
>
: Buttons on the main unit
[
]
: Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
MENU
ui
Menu Operations
With the AVR-1908, settings and operations for most functions can be performed by operating while looking at the menus displayed on the
monitor screen.
Operations
The same operation is possible on the main unit or remote control
ENTER, op
unit.
1
MENU
Press
The menu is displayed.
b To operate from the remote control unit, be sure to set the [MODE
SELECTOR 1] to "AUDIO" .
2
Press
ui
ENTER
press
3
Press
ui
ENTER
then press
4
To change the setting:
Press
ui
to select the item you want to change, then
o p
press
to change the setting.
b To return to the previous item, press RETURN.
b Select "Default Yes" , then press o to reset to the default setting.
5
ENTER
Press
6
MENU
Press
When MENU is pressed, the settings made up to that point are entered
and the settings menu screen turns off.
.
to select the item you want to set, then
.
again to select the item you want to set,
.
to enter the setting.
to finish.
Example of Display of Default
Values
In lists of selectable items or adjustable ranges, the item
surrounded by a border is the default value.
[Selectable items]
A
B A + B