Related Manuals for Security Tronix ST-BTWD650IR2812 B
Summary of Contents for Security Tronix ST-BTWD650IR2812 B
- Page 1 INSTALLATION MANUAL ST-BTWD650IR2812 B or W Weatherproof Day/Night Infrared Color Camera...
-
Page 2: Package Contents
PACKAGE CONTENTS This package contains: One ST-BTWD650IR2812 camera with Black or White housing One extension tube for mounting on a ceiling One installation manual One hex wrench for adjusting the mounting bracket Four anchors and screws to mount the camera NOTE: The ST-BTWD650IR2812 camera requires a 12 volts DC power with a minimum current of 800 milliamps (.8 Amps) or a 24 volts AC power supply with a minimum current of 500 milliamps. -
Page 3: Unpacking And Handling
INSTALLATION AND OPERATION CAUTION: To reduce the risk of electric shock and/or damage to the camera, do not disassemble this camera or open the casing. There are no user-serviceable parts inside and breaking the camera’s weather seal may allow humid air to enter the camera which can cause a foggy or washed-out image. -
Page 4: Lens Adjustments
LENS ADJUSTMENTS Zoom and focus adjustments are made via 2 knobs on the rear panel of the camera. NOTE: The tension of these knobs is set at the factory for maximum weather protection. Do not loosen the screws which hold the knobs in place. This could cause the adjustment rod to fall inside the camera and will void the warranty. -
Page 5: Osd Settings
OSD SETTINGS Accessing the camera’s OSD menu and making menu selections is accomplished using the “joy stick” mounted on the output cable of the camera. Use the UP, DOWN, LEFT (L) and RIGHT (R) to navigate the menu. PUSH the button inward to make selections. -
Page 6: Troubleshooting
TROUBLESHOOTING No picture after applying power (i) check all plugs and cables are securely connected to the proper connectors; (ii) ensure your power supply is providing the correct voltage and current. The picture has ripples (i) check to see if the power supply is experiencing AC ripple, if so a filter may be required;...