Configuration; Accessing The Web Configuration Utility - D-Link DCS-930L User Manual

Day wi-fi network camera cloud camera

Hide thumbs Also See for DCS-930L:

Table of Contents

Section 4 - Configuration

Configuration

After completing the Camera Setup Wizard, you are ready to use your camera. The camera's built-in Web configuration utility is designed to allow

you to easily access and configure your DCS-930L.

At the end of the wizard, click Go To Camera, or enter the IP address of your camera into a web

browser, such as Internet Explorer. To log in, enter the User name admin and the password

you created in the Setup Wizard. If you did not create a password, the default password is

blank. After entering your password, click OK.

Note: If you are directly connecting your PC to the camera, or if you are using the camera on a

closed network, the default IP address is 192.168.0.20.

Make sure that you have the latest version of Java installed on your computer to ensure proper

operation when viewing the video in Java mode. The Java application can be downloaded

at no cost from Sun's web site (http://www.java.com).

When you connect to the home page of your camera, you will be prompted to download

ActiveX. If you want to use ActiveX to view your video images instead of Java, you must first

download ActiveX. Then go to Live Video > Camera and click on ActiveX.

D-Link DCS-930L User Manual

Table of Contents

Show Quick Links

Table of Contents