D-Link DCS-930L User Manual page 39

Section 4 - Configuration
Enable e-mailing
Click to enable this option allowing snapshots to be sent using the settings
of images to an entered above.
e-mail account:
Choosing Always will continuously send snapshots to the recipient's e-mail
account, beginning right away. Choosing Schedule will allow you to select a
schedule for when to start and stop the sending of snapshots to the recipient's
e-mail account.
Click Motion/Sound Detection if you would like to send snapshots when
motion or sound is detected. You can choose to E-mail frame immediately
to send a snapshot as soon as motion or sound is detected. If you click E-mail
attached with 6 frames the e-mail will include snapshots before and after
the detected event. The Frame interval time specifies the number of seconds
between each snapshot.
E-mail Interval:
Enter a number to set the period of time (in seconds) between snapshot e-mails.
• If Always is selected, e-mails will be sent continuously according to the
interval specified.
• If Schedule is selected, e-mails will be sent according to this interval during
the days and times specified in the schedule.
• If Motion/Sound Detection is selected, e-mails will be sent according to
this interval while motion or sound is being detected.
Test E-mail
This will send a test snapshot by using the e-mail settings specified above.
Account:
Click Save Settings to save your settings.
D-Link DCS-930L User Manual 39