D-Link DCS-930L User Manual page 51

Day wi-fi network camera cloud camera
Hide thumbs Also See for DCS-930L:
Table of Contents

Advertisement

Section 4 - Configuration
Router Set-Up and Installation
The following steps should apply to any router that you have on your network. The D-Link DIR-655 is used as an example to clarify the configuration
process. Configure the initial settings of the DIR-655 by following the steps outlined in the DIR-655 Quick Install Guide.
3. Access the Router with Your Web Browser
If you have cable or DSL Internet service, you will most likely have a dynamically assigned
WAN IP Address. Dynamic means that your router's WAN IP address can change from
time to time depending on your ISP. A dynamic WAN IP Address identifies your router
on the public network and allows it to access the Internet. To find out what your
router's WAN IP Address is, go to the status menu on your router and locate the WAN
information for your router (Status > Device Info in the example shown on the next
page). The WAN IP Address will be listed. This is the address that you will need to type
in your Web browser to view your camera over the Internet.
Your WAN IP Address will be listed on the router's
Status > Device Info page.
D-Link DCS-930L User Manual
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents