Mackie HDR24/96 User Manual page 9

Rehearse allows you to practice punching without
actually recording anything to disk, saving you the hassle
of deleting unwanted takes while monitoring and fine-
tuning Autopunch points.
Each track has eight
"virtual" takes that you can
record to and play from.
Take Select sets the active
take for the selected track.
Use the Track Select
buttons to select which track's virtual take and meter information
is shown in the Take and Meter displays; the selected track is
shown in the Track Number display.
Auto Take automatically advances the Take Number of all armed
tracks at the start of each record pass. When a track's Take
number reaches 8, it remains there until you change it.
Tip: Use Loop and Punch with Auto Take to automatically
record up to eight takes per track.
- -
OL
- -
2
- -
4
The Meter displays the selected track's input or
- -
7
- -
playback level. On the Remote 24 and HDR24/96
10
— -
meters, 0 dB represents "full scale", with no
15
- -
20
- -
headroom to spare. Before recording, set the input
25
- -
level from your console as hot as possible.
30
- -
35
- -
40
- -
50
TAKE
AUTO
(MINUTES)
TAKE
DELETE
TAKE SELECT
LAST
REHEARSE
TRACK NUMBER
—
(SECONDS)
TRACK SELECT