Operational Note - NewAir AH-600 Owner's Manual

Baseboard heater
Hide thumbs Also See for AH-600:
Table of Contents

Advertisement

COMFORT SETTING MODE
Rotate mode knob to your desired temperature. There are three distinct
settings: 64°F, 70°F, and 75°F. In this mode, the heater will automatically select
the output power to accommodate your temperature setting. When the room's
air temperature reaches your desired temperature, the unit will automatically
lower the output power to maintain your space at the desired temperature.
When the room temperature is less than the selected temperature:
output power is 1500 W at all times.
When the room temperature is 0 to 2 degrees higher than the
selected temperature: output power changes from 1500W to 750 W.
When the room temperature is 2 degrees or more higher than the
selected temperature: heater will stop heating
AUTO-OFF TIMER
intervals. When the time runs out, the heater will turn off automatically.

OPERATIONAL NOTE

When switching the heater on for the first time, it is normal to observe any of
the following:
An unpleasant smell
Small cracking sounds
Traces of visible smoke
This is normal for new components. Run the heater on high for 2 hours in a
well-ventilated area to eliminate any left-over residue.
If the effects last longer than two hours, turn the heater off, unplug it, and
contact Customer Service for support.
8
When the heater is in use, you can set the timer for
turning off the unit. Press the TIMER INCREASE
button (E) and TIMER DECREASE button (G) to set the
timer between 0.5 and 7.5 hours in 0.5 hour
http://www.NewAir.com

Advertisement

Table of Contents
loading

Table of Contents