Bluetooth - Cisco DX70 User Manual

42 Settings

Bluetooth

In Settings, tap Bluetooth On to activate Bluetooth.
Your system remains visible
for 5 minutes after you enter
the Bluetooth menu. To
reactivate visibility, tap here.
A list of visible devices that are ready to with
paired with your device.
About Bluetooth
With Bluetooth, you can pair your
mobile phone with your DX device
so that you can use the microphone
and speaker of the Cisco DX device
to communicate with callers to your
mobile phone. You can use your Cisco
DX device to place and receive calls
with your mobile phone.
You can also add contacts from your
mobile phone to your Cisco DX device,
which makes it easy to call people on
your mobile phone contact list.
Use Bluetooth to Connect
Assume that your Cisco DX70 or
Cisco DX80 has not been paired
with a Bluetooth device already. To
activate Bluetooth, tap Bluetooth On
and then tap the word Bluetooth. A
list of available devices is displayed.
Devices must be made visible to
other Bluetooth devices to appear in
this list.
Your system remains visible for
5 minutes after you enter the
Bluetooth menu. To reactivate
visibility, tap as shown at left.
Note that if your system is already
paired and you want to pair with
another system, you must terminate
the current pairing before any new
pairing can take place.
D1510408 English
User Guide Cisco DX70, Cisco DX80
Produced: June 2015, All Contents © 2014–15
Cisco Systems, Inc. All Rights Reserved.