Cleaning The Heat Exchanger Filter ( ) - Samsung DV9 series User Manual

care and cleaning
CLEANING THE HEAT EXCHANGER FILTER (
1. Open the condenser compartment cover.
2. Unlock the fi xer.
3. Remove the Heat Exchanger Filter.
4. If the heat exchange fi lter is not cleaned regularly, a display
indicator will be turned on or blinked as a reminder.
If so, check the heat exchanger fi lter and clean it to make
sure that the fi ler is not blocked with lints.
• Remove the sponge from the fi lter assembly and clean
it by rubbing in running water. Dust off the mesh part
CAUTION
with soft brush. After cleaning with water, dry the Heat
Exchanger Filter thoroughly before reinserting it back.
• Clean the heat exchanger fi lter after every 2 cycle is
completed.
• When the indicator turns on or blinks, check the heat
exchanger and clean it to make sure that the fi lter is not
blocked with lints.
5. Clean it with a soft brush or vacuum cleaner.
(It is recommended to clean it at least once every month.)
Do not touch the heat exchanger with your hand.
Otherwise, it may cause an injury.
CAUTION
• When assembling the Heat Exchanger Filter after cleaning it, make sure that the fi xer is
set to the lock position.
CAUTION
DV90H8000HW-03407A-04_EN_150706.indd Sec10:28 DV90H8000HW-03407A-04_EN_150706.indd Sec10:28
English - 28
)
Fixer
2015-07-06 2015-07-06 3:18:46 3:18:46