1. Manuals
  2. Brands
  3. IP Power Manuals
  4. Power distribution unit
  5. 9858S S+Ping
  6. User manual

IP Power 9858S S+Ping User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IP Power 9858S / S+Ping
9858T / T+Ping
User Manual
Firmware Version: 1.0B
Date Released: SEP. 2014
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9858S S+Ping and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IP Power 9858S S+Ping

Summary of Contents for IP Power 9858S S+Ping

  • Page 1 IP Power 9858S / S+Ping 9858T / T+Ping User Manual Firmware Version: 1.0B Date Released: SEP. 2014 - 1 -...
  • Page 2 Warning: Any changes made to this equipment without permission may cause damages to the device! IMPORTANT NOTICE 1. IP Power 9858 was designed for indoor use, we carry no responsibility for possible damages caused by outdoor use, especially in the rain.

  • Page 3: Table Of Contents

    Table of Content WELCOME ......................5 Introduction ..............................5 Features : ............................... 6 Specification ..............................6 Minimum System Requirements ......................... 6 Package Contents ............................7 INTERFACE DESCRIPTION ................8 Front View..............................8 Rear View ..............................9 Fuse replacement ............................10 SETTING UP YOUR DEVICE ................11 Before Starting .............................11 Hardware Connection ..........................11 Software Installation ...........................11...
  • Page 4 FAQ : ........................61 - 4 -...

  • Page 5: Welcome

    Welcome Introduction IP Power 9858 is a new generation of the Power Distribution Unit (PDU) & Remote Power Control (RPC) system. Its able to connect to the WiFi network plus WPS function for easy & quick set up a device to user’s wireless home/office network and control in the network With embedded web server and HTTPS protection , 9858 supports higher grade security as working on Internet.

  • Page 6: Features

    13. Specific software developed by Aviosys and provided free of charge : - SDK Available : HTTP Command & Language - IP Power Center - for control multiple Aviosys IP devices in same software - CNT software ( Cross Network Technology )- allows user eliminate set up work on any Router without port forwarding , simply Plug &...

  • Page 7: Package Contents

    Package Contents 1. 9858 Unit x 1 2. 9858 Installation CD Power IN Cable (option) Please double check the power cable compatible for 10 amp current loading . - 7 -...

  • Page 8: Interface Description

    Interface Description Front View From Left to right : Power Status Indicator: The Power Status #1 ~ #4 Indicator - Green light ON as output power ON. Reset : Set back to default setting by long press To reset to original manufacture settings, hold down the reset button with a sharpen pin for 5- 6 seconds then RELEASE.

  • Page 9: Rear View

    Rear View From Left to right : There are 2 models outlet : 4 Output Power Ports: * 9858-T : NEMA * 9858-S : IEC320 9858-T ( Upper picture ) Connect up to 4 separate devices 9858-S ( Down picture ) that will be controlled by the 9858.

  • Page 10: Fuse Replacement

    Fuse replacement 1.) The fuse is located between the power switch and the power input plugs. 2.) Carefully remove the fuse holder with a flat screwdriver. 3.) The fuse can be purchased from electronic shops. Specification : U/C GFE 10A 250V (PF) - 10 -...

  • Page 11: Setting Up Your Device

    IP Power Software: IP Edit ( Required) IP Power Center *( For multiple IP Power devices control purpose ) Installing Software 1.) Place the Media Link-IP Family CD into the CD/DVD Rom drive. (The CD will auto run , but if it does not go to the CD/DVD Rom drive and select the “autorun.html”...
  • Page 12 2.) Click on the IP Power Section Bar 3.) Select the IP Power 9858 4.) All the available downloads for the 9858 will be shown - 12 -...

  • Page 13: Connection By Wifi- Wps ( Wifi Protection Service )

    Connection by WiFi- WPS ( WiFi Protection Service ) IP Power 9858 has WPS function , which can assist user setup the WiFi connection from user`s router and IP Power 9858 automatically & fast . Before using WPS function, please check your WiFi router and see if there has WPS function first .
  • Page 14 One short press “ WPS “ button on 9858  One Short beep  5-10 seconds  short 2 beeps  WPS connection successful Step 5 : Execute IPEDIT.exe . There is WiFi IP address of 9858 shown in IPEDIT.exe as following : Device name in local devices area is “ IP POWER (w) - 14 -...
  • Page 15 If can’t see the IP in the area of Local Devices of IPEDIT.exe. Please disable the Firewall and Anti Virus software temporally and try again . Step 7 : Double click the IP address and your PC will execute web browser like IE ,Firefox or Google Chrome and there is wizard pop up to enquire the Username and Password .

  • Page 16: Connecting First By Lan -Network Cable Then Setup For Wifi Connection

    Without WPS , user can use LAN network cable to connect 9858 first . “ IPEDIT “ LAN connect by IP Search software IP Edit is a search tool designed to search, configure, or access the IP Power 9858 from a local networked computer. IP Power 9858 Default Login / Password Default IP: 192.168.1.168 (While this is no DHCP apparently)
  • Page 17 If can’t see the IP in the area of Local Devices of IPEDIT.exe. Please disable the Firewall and Anti Virus software temporally and try again. Select the 9858 device and the device information will pop up on the right. Check to see that the gateway IP and the IP Address (9858) match user current network. If not, type in the correct information, then hit the submit button to save changes.
  • Page 18 Please click “ APPLY “ as seeing the suggest wizard , click " yes " to ignore the remind message of IP being used and then type the Username and Password to change the IP setting. Username : admin Password : 12345678 Notice : # Segment : The first 9 digits of the IP Address .
  • Page 19 1) As go to WiFi Survey page, there is a list for the available WiFi router near 9858 . Please select the one plan to use and click “ Add Profile “ 9858 will get most information from user’s router automatically and user just need to type the password to connect with the WiFi router then click “...
  • Page 20 Select the router and press “Activate “ As connection successful , the page will turn to “WiFi Information “ and show the information . Now user can see the new WiFi IP address which can be found by software IP Edit. Then user can remove the LAN cable and re-log in the 9858 by IP Edit re-search of above WiFi IP address.

  • Page 21: Internet Setup

     Setup Port Mapping / Port Forwarding in your router. Please check your Router owner’s manual . Use our own software “ IP Power Center “ : Please refer to the “IP Power Center “ manual  in the CD...
  • Page 22 3.) Then type in the 9858 Name that user have selected for the device and press the Search button. 4.) Find user device and double click on the screen and a IE window will pop up connecting to user device. *User device must be Port Forwarded for the login screen to appear. EX: The 9858 device name as IP_POWER , and user can search the device easily : 5.) After user have connected to user device, type in the Login and Password for user device - 22 -...

  • Page 23: Web Interface

    Web Interface Connect to your Device Once the 9858 has been setup correctly, log into the device. First Option 1.) Go to IP Edit to find the device that is being used 2.) Double click on the device linked and an IE window will appear with the loading screen Second Option 1.) Open Internet Explorer type in the IP Address of the device followed by the : sign.
  • Page 24 The Control Console The left side Menu of the Web Interface control the functionality and setup of the IP Power 9858. The IP Power 9858 Console consists of six main sections which will be explained in details below.  Device name & Hide or Display the left setting column ( for smart phone control ) ...

  • Page 25: Device Name

    You can change the device name here : Application  IP Server  Device name Change name “ IP POWER 9858 “ as “Enjoy 9858 “ Please change the name in English only and do not use symbol like !@#$%^&*()_+ Device Name &...

  • Page 26: Information

    Information : In this section, it shows Time at Year – Month – Date Hours : Minutes : Seconds . To setup the Time , Please go to “ System  Management  NTP Settings “ , please press “Apply” to save the new setting . IO Control : The IO Control Section allows you to directly / automatically control the outlets of the 9858 as well as schedule Daily, Weekly, and Monthly power cycles.
  • Page 27 Control There are 2 setting pages in this Section. One is “ Power Control “ and another one is “Advance Setup “ A. Power Control : User can do the following 3 basic operation in this page : 1. Manual control each port ON or OFF directly by pressing the power sign. Power Cycle : This section allow user to setup the output Reset action.
  • Page 28 The following 3 pictures shows that after press the power cycle with 5 seconds setting , the outlet “ Power1 “ will turn off for 5 seconds , then turn ON later . The power cycle action will execute after press the “ Power Cycle “ button . B.
  • Page 29 Beep Alarm Setting: User can setup the operation beep ( short time beep) sound here. Default Power Status : The control section allow user to set the power status on ON or OFF or LAST when the device power Rebooted . The output will be same status as choose LAST before the device power turn off.
  • Page 30 The schedule allows you to control the power outlet or turn ON / OFF/ RESET at assigned time Adding a Scheduled Event 1. Select the Action Duration : There are 3 setting - Once , Every Day . Every Week 2.
  • Page 31 Once the scheduler has been Set Up , hit the “ ADD No.:X Power Schedule “ button and you will see your setting located on the bottom of the Action section . Edit a Schedule Event : Step1 : Please select the Rule you want to edit in Scheduler Table. Then the button “ADD No.:X Power Schedule “...
  • Page 32 Delete - Click “ Delete “ button to remove a rule form the list . Ping Ping function is for 9858S+Ping & 9858T+Ping modle only. The Ping function allows the device to Ping an IP Address automatically to act as a watchdog to make sure the device getting Ping and working properly.
  • Page 33 There are 3 sections of the setting area : 1. Setting Rule Numbers : User can click to select different rules numbers at the right side button “ Rule No: X “ as following pictures . There is 4 rules available. 2.
  • Page 34  Logic Model : User can select the action activate by one / two IP Host failure or either one fail Single : Execute Action by one IP Host failure . : Execute Action by either one IP Host failure as setting 2 pcs IP Host : Execute Action by both IP Host failure as setting 2 pcs IP Host Single : 9858 will Ping one IP address.
  • Page 35  Repeat : After the ON/OFF/Reset action , user can setup the Ping action to keep ping ( Continue ) or to Stop Ping ( Stop) .  Enable Ping function : In the selected Rules number , please select the outlet number power to activate as ping fails and then press “...

  • Page 36: Network

    Network : The Network Section allows user to setup LAN –Ethernet or WiFi settings and WPS setting . There are 4 sections : Setting , WiFi Info , WiFi Survey and WPS . Setting : This Setting section shows the network status of 9858. Please select one connect Icon – either LAN or WiFi connection but not both connected after setting completed .
  • Page 37  Network Type : The NETWORK TYPE is the door for Internet connection , Email , DHCP UPNP NET Server . Please select correct type of LAN or WAN for the user to log in 9858 form Internet and use above functions .
  • Page 38 A. STATIC (fixed IP) : Setup IP address manually. This allows the 9858 to obtain an IP Address automatically from user`s server connected to Internet. Recommended for users who need to control through Internet. Please do fill up the correct gateway for login from Internet . B.
  • Page 39 User Name : type in the format ISP supply for PPPoE connection Password : type in the format ISP supply for PPPoE connection Verify Password : Re-type the password Operation Mode : There are 3 mode for PPPoE connection Keep Alive : Auto connection in the setting time as disconnect. On Demand : Auto connection after setting idle time as disconnect .
  • Page 40 Obtain IP address via DHCP model . This allows the 9858 to obtain an IP Address automatically from user`s server connected to Internet. Recommended for non advance users. User can only revise the Host Name under DHCP mode. This is also the default setting for fast LAN connection solution.
  • Page 41 WiFi Information Section : There are WIFi Information : connect to the router , Single strength , MAC & IP Address , Local IP Address : It shows the IP of WiFi connection ( Allocate Supply by WiFi Router ) Connection Status : It show the router name of 9858 is connected.
  • Page 42 WiFi Survey This section is to arrange WiFi connection. 9858 will auto search the WiFi Router nearby and also their information as boot up , 9858 user can just select the router and type the password to connect with your WiFi router and make connection easily. Add WiFi Router into “...
  • Page 43 Step 2 : 9858 will auto get the most information of your router and you just need to type the password to connect with the WiFi router then click “ Apply “ Then you will see the Router name add in to “Profile list “ Connect 9858 to this add Router : Active the WiFi Router in “...
  • Page 44 Note : Delete the Router form Profile list , do not affect the connection of WiFi. WPS ( WiFi Protection Service ) To connect IP Power 9858 with WiFi router by WPS function . Please check if the router supports WPS function fist .
  • Page 45 Step 4 : Press the WPS buttons of WiFi AP ( Router) soon in few seconds Step 5: After few seconds , there are short 2 beeps which means WPS connection successfully. There are messages updated during the configuration in “ WPS status “ section : As WPS connection successfully , there is “Configured “...
  • Page 46 Which means the WPS connection fail and there is one long beep mean the connection fail. Please try again. ) Step: 6 : User can see the WPS connection in section “ WiFi Info “ & “ WiFi Survey “ of Network In “...

  • Page 47: Application Settings

    Application Settings Email There are 2 sections in this part -- E-mail setting and POP3 Control :  Email Setting : User can get e-mail advice as one of the following situation happen : Receive E-mail with IP information & MAC Address as 9858 device boot up. Receive E-mail as ON/OFF status change in each output .
  • Page 48  Port : This is the port of SMTP Server. Most common port to send out e-mail is port 25  User : Login for the e-mail address . Ex: 9858@gmail.com  Password: Password for the e-mail address. EX : 12345678 ...
  • Page 49 In this section , user can setup IP Server & CNT ( Cross Network Technology ) , IP Server & CNT Setting The IP SERVER allow 9858 to be easily accessed on the internet by our IP Power Center or IP EDIT. With this feature anyone can find there device with no problems.

  • Page 50: System Setting

    System Setting Management In this section there are several setting : Administrator setting, Host Connection Interval , NTP setting , Backup Setting , Load Factory Default , Restart System The message show : “ You may configure administrator account and password, NTP settings here, Save system settings by exporting them to a configuration file, restore them by importing the file”...
  • Page 51 Operator : The operator can only control the setting of “ IO Control “ section but can not see other page of 9858 . Viewer: The viewer can only see the “ IO Control “ section , but can not see other page of 9858. Default Setting of the Authorities : Authority Account name...
  • Page 52 User can export the setting of 9858 into a “ DAT “ format . It will save most the setting in 9858 . User can import the file which is exported from 9858 as “ DAT “ format . It will help user to setup many 9858 device in a short time. As press “...
  • Page 53 System Information In this section , user can get the system information and change own Language display in 9858 webpage in “ Language Setting “ : - 53 -...
  • Page 54  Language Setting : User can change the display Language - two customize Language and build own Language by simple procedure . Please refer the following two procedures : Change the text in SDK & Language Customize procedure . A. Change the Text in SDK : A-1 .
  • Page 55 A-2 . Open the 5 files by WordPad / NotePad - Windows embedded software A-3. Change the Texts between the two “ marks after “ msgstr “ – see screenshot below Example: <message msgid="email title" msgstr="E-mail Setting" /> The webpage will display the Text in yellow background as above example Notice : To avoid any update problem , please ONLY change the Texts between the two “...
  • Page 56 B. Language Customize procedure : B-1. Please go to System  Information  Language setting. Change the “Select Language “ as “Other 1” And click “ Apply “ Notice : There are 5 languages setting in this section :  ENG : Can’t change ...
  • Page 57 B-4. Select the 5 files you had revised the Texts and click “open “ . B- 5. Then the webpage will show that you have selected 5 files . Press “Apply “ to execute the update procedure B- 6 . Then the webpage will display “ user select 5 files “ to update. Press “ Apply “ to execute the replacement .
  • Page 58 System Log In this section , user can get the 9858 system operation information. The system information will be deleted after 9858 device power reboot. Firmware The firmware update function only support in LAN connection . NOT support under WiFi connection .

  • Page 59: Controlling The Device

    Controlling the Device CGI HTTP Commands CGI Commands allow you to easily integrate the 9858 with other systems and programs. Please read the instructions carefully on how to use the Http:// Commands To use http:// Commands open up a web browser and type in the command that you would like to use.

  • Page 60: Telnet Control

    Example : Turn on POWER1 and POWER2 and turn off POWER3： http://192.168.1.18/set.cmd?cmd=setpower&p61=1&p62=1&p63=0 System return： CGI Command : Data follows p61=1,p62=1,p63=0 2.5 Setup power to reboot as RESET：setpowercycle& p6x=delayTime X can be 1to 4 ( power 1 to power 4 ) ，；dealyTime mean the time ( second) waiting for reset For example : http://192.168.1.18/set.cmd?cmd=setpowercycle...
  • Page 61 FAQ : Q1: Why can I see 2 IP address on IPEDIT.exe but can only reach one ? Why did IPEIDT.exe show the LAN IP address as no network cable connect ? Why did IPEDIT.exe show the WIFI IP address as no WIFI router available ? Ans.: 9858 will remember the LAN / WAN setting one connect .Please select the IP you can log into 9858 to operate.
  • Page 62 The NETWORK TYPE is the door for Internet connection , E-mail , DHCP UPNP NET Server . Please select correct TYPE LAN or WAN for the user to log in 9858 form Internet and use above functions . Notice : Under DHCP mode - either select LAN or WiFi connection, 9858 will get the Network type ( Gateway ) information automatically.

This manual is also suitable for:

9858t t+ping

Table of Contents