Table of Contents
Advertisement
CHANGING THE SPRAY TIP
W A R N I N G
NEVER change spray tips without engaging the lock-out on the trigger handle and NEVER point the
Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure.
Engage the lock-out on the trigger handle by pushing the trigger lock button into the slot.
Pull back the quick-connect collar on the spray wand.
Push the spray tip into place in the spray wand.
Push the collar forward so that the spray tip is secured properly. Check to see that the spray tip is
secure.
Spray Tip
2
1
3
Spray Wand
SPRAY TIP
Green - Narrow fan tip (25° )
The green pressure washer tip provides high versatility with its 25 degree angle
tip. Referred to as the washing tip, because it provides adequate pressure to
remove dirt from surfaces, but is designed to not damage many surfaces. This
O
pressure washer tip is designed for "sweeping" foliage or debris given its wide
25
angle. This tip is versatile due to its wide area of cleaning and strong pressure
application.
White - Wide fan tip (40° )
The white 40 degree tip, referred to as the "fan" tip creates the widest area of
cleaning with relatively low pressure. This pressure washer tip is best used for
O
light or delicate cleaning applications. It is recommended for light cleaning on
40
wood decks and other soft or delicate surfaces.
OPERATION
(See Figure 10.)
1-Pull back the quick-connect collar
2-Push the spray tip into place
3-Push the collar forward
Fig. 10
APPLICATION
EN - 18
Hide quick links:
Advertisement
Table of Contents
