GreenWorks GPW 1702 Operator's Manual page 17

USING THE SPRAY WAND TRIGGER
For greater control and safety, keep both hands on the pressure washer gun at all times.
TO ENGAGE THE LOCK-OUT
Push up on the lock-out until it clicks into the slot. This will prevent any unintentional starts of the
pressure washer.
TO DISENGAGE THE LOCK-OUT
Push the lock-out down and into its original position. For the most effective cleaning, the spray tip
should be between 8 in. and 24 in. from the surface to be cleaned. If the spray is too close it can
damage the cleaning surface.
W A R N I N G
Do not slide lock-out button when you have the trigger at back position.
OPERATION
(See Figure 9-1.)
(See Figure 9-2.)
Locked
Fig. 9-1
EN - 17
Unlocked
Fig. 9-2