Table of Contents
Advertisement
• MAC Address - The MAC address of the controlled computer(s) in the LAN.
• IP Address - The assigned IP address of the controlled computer(s) in the LAN.
• Bind – Enable or disable the arp binding.
• Modify - Edit or delete item.
When you want to add or modify an IP & MAC Binding entry, you can click the Add New
button or Modify button, then you will go to the next page. This page is used for adding
or modifying an IP & MAC Binding entry (shown in Figure 4-39).
Figure 4-39 IP & MAC Binding Setting (Add & Modify)
To add IP & MAC Binding entries:
1.
Click the Add New.. button.
2.
Enter the MAC Address and IP Address.
3.
Select the Bind checkbox.
4.
Click the Save button to save it.
To modify or delete an existing entry:
1.
Find the desired entry in the table.
2.
Click Modify or Delete as desired on the Modify column.
To find an existing entry:
1.
Click the Find button (shown in Figure 4-38).
2.
Enter the MAC Address or IP Address.
3.
Click the Find button in the next page (shown in Figure 4-40).
TL-R860
Figure 4-38 IP & MAC Binding Setting
- 40 -
Cable/DSL Router User Guide
Advertisement
Table of Contents
